DryXtreme - ND

DryXtreme - ND 

Heatless adsorption dryers (cold regenerated)

Air flow 2,7 – 59m³/min

NC DryXtreme adsorption dryers offer dew points from - 40°C, and allow precise and efficient operation in several critical applications such as the chemical-pharmaceutical, food, electronics and automotive industry or in low temperature outdoor installations. 
The NC dryers consist of two tanks in painted carbon steel, each of which is filled with adsorbent material (exclusive adsorbent activated alumina/molecular sieve mix). The compressed air is dried alternatively by 2 columns which are regenerated by a minimal part of the air that has already been treated when the adsorbent material becomes saturated with moisture.
Benefits
Energy-saving features 
Unique mix of adsorbent activated alumina/molecular sieve for greater process reliability.
Large adsorbent bed: allows a minor flow rate and a high contact time of 5 seconds for maximum efficiency;
High-quality components and exclusive piston valves with front seal and pneumatic action to ensure high reliability and to minimise production downtime;
Standard DMcontroller electronic control with 4-position switch for regeneration air adjustment: allows considerable energy savings;.
Regeneration air flow in countercurrent increases the performance and efficiency of the adsorbent bed;
Gradual re-pressurisation phase: prevents fluidisation of the adsorbent bed and extends the life of the adsorbent material;
Main components easily accessible for easy maintenance.
 
Technical specifications
Structure and columns made of carbon steel coated with epoxy powder
Exclusive adsorbent activated alumina/molecular sieve mix.
Piston valves with front seal and internal components in stainless steel and teflon seals
Stainless steel diffusers
Silencers with a metallic structure, easy to clean
Control panel suitable for outdoor installations (IP55) including a DMcontroller with LED status indicators and ON/OFF switch
dEfficiency indicator with silica gel
Power supply: 230 V +/-10% / 1Ph / 50-60Hz. Different voltages are available upon request 
Minimum/maximum operating pressure: 4/10 bar(g). Higher pressures are available upon request.
Minimum/maximum inlet temperature : +5/+50 °C
Minimum/maximum ambient temperature: +5/+45 °C
 
Accessories
Coalescing oil pre-filters HEF "S" series (0.01 micron) equipped with a condensate discharger;
Post-filters HEF series "P" (3 micron);
Echo Control: for precise control of the dew point and minimal power consumption;
Service Kit.
Техданные Запрос на компредложение Запрос на компредложение
Запросить об оборудовании
Отправить запрос