DE iTech

DE iTech 

Energy saving refrigeration air dryers

Air flow 0,3 – 32,0 m³/min

DE iTECH  is the new generation of energy saving refrigeration cycle dryers with which MTA not only renews its range of products for the processing of compressed air but reinterprets the concept of thermal mass to which the DE Hybrid dryers owe their success. The innovative Impulse Technology system offers important advantages in terms of energy savings, reliability and management costs thanks to the ability of DE iTECH to adapt perfectly to the real requirements of the system. The dryer adjustment system controls its operation and ensures the ideal energy solution for drying of the compressed air, allowing high savings and at the same time excellent stability of the dew point, even under dynamic conditions.

Benefits
Innovative Impulse Technology system for control of the drying capacity via impulse adjustment of the refrigerant liquid flow or due to the thermal mass effect.
Compact 3-in-1 aluminium heat exchanger with optimised perfect countercurrent heat exchange, it contains a stainless steel condensate separator
Minimal load losses (average 0.09 bar) through fluid dynamic optimisation and the large transfer sections 
Constant dew point under every operating condition
Low environmental impact and reduced carbon dioxide emissions thanks to the Impulse Technology energy saving system and the use of R134a and R410A environmentally friendly refrigerants 
Dual frequency power supply for models 101-165-190-230-270-320
Quick and easy installation
Simplified maintenance
Maximum reliability
 
Technical specifications
Structure in carbon steel sheeting hot painted with RAL7035 epoxy powder 
Environmentally friendly liquid refrigerants R134a and R410A
Hermetic piston/rotary compressors and high energy efficiency scroll 
New compact 3-in-1 aluminium heat exchanger with high energy efficiency aluminium  and low load losses
Tubeless condenser with steel fins protected by a double layer of immersion painting (DEiT 003 – 032)
Finned batteries with copper pipes and aluminium fins generously dimensioned (DEiT 040 – 270)
Standard condenser filters on DEiT 14a - 320
Axial fans 
Rolling capillary
New DEC microprocessor control with display of the level of energy savings, equipped with several parameters and alarms such as: high temperature, low temperature, temperature probe failure etc.
General alarm dry contact
Remote ON/OFF dry contact 
Standard programmable timed condensate discharger
Phase monitor and compressor cranckcase heater (DEiT 165-320)
Maximum ambient temperature = +50°C
Maximum working pressure = 16 barg
Degree of electrical protection = IP22
 
Accessories
Zero-loss capacitive condensate drain
Timed/Capacitive drain conversion Kit 
Monitoring system RS485
Certifications  
  • EAC
  • UL
Request product information