DryXtreme - NST

DryXtreme - NST 

Adsorption air dryers

Air flow 2 – 148 m³/min

The heat regenerated adsorption air dryers in the DryXtreme – NST range treat large volumes of compressed air as the air flow of treated air necessary for regeneration is minimal.
The dew point of- 40 °C allows accurate and efficient operation in many critical applications such as the chemical-pharmaceutical, food, electronic, automotive industries or in external, low temperature installations.
The NST dryers are made up from two painted carbon steel vessels, both filled with absorbent material (activated alumina). The compressed air is dried alternately by the 2 towers, which are regenerated through combination of the heat emitted by a heater inside each vessel and a minimum flow rate of dry air.
 
Benefits
Activated alumina adsorbent material with high resistance to abrasion;
Large adsorbent bed: allows a lower flow speed and higher contact time for maximum performance;
Regeneration air counter-current flow: increases performance and the efficiency of the adsorbent bed;
Gradual repressurisation phase: prevents the fluidization of the bed and extends the service life of the adsorbent material;
Possibility of connection to ModBus networks via RS485 port
Easily accessible main components to facilitate maintenance interventions
Top quality components;
Maximum reliability.
 
Technical features
Structure and towers in epoxy powder coated carbon steel
Activated alumina based adsorbent material (molecular sieves available as an optional)
Silencers with easy to clean metal structure
Standard compressed air pressure gauges
Control circuit board with Modbus RS485 port
Electric power supply: 400 V +/-10%/3Ph/50 Hz. On request, power supplies at 60 Hz and different voltages.
Min/max. operating pressure: 4/10 bar(g). Higher pressures are available on request.
 
Accessories
Oil pre-filters with “S” range HEF coalescence (0.01 micron) with condensate drain;
“P” range HEF post-filters(3 micron);
Dew point measuring device for the accurate control of the dew point and minimum energy consumption;
Service Kit.
 
Certifications  
  • EAC
Request product information